How to RSS

Starting your Kohler engine can be easy with the right knowledge and preparation. 1. Check the oil level using the yellow dip stick and add if necessary. You will see 2 yellow dip sticks on your engine. These both go to the same reservoir. In most cases, 10W-30 will do. 2. Check the fuel level. Make sure this is at least half full. 3. Check the air filter and replace if dirty or clogged. 4. Check the emergency stop switch. When it is pushed down the engine will turn of or cease to run. Twist to the right and it...

PowerKing assembly guide for the PK0342 42-Ton Kinetic Log Splitter Required Tools: - 13mm, 17mm, 19mm Sockets - Adjustable wrench - Needle nose pliers - Rubber mallet - 10w - 30 engine oil / 0.63 Quarts - 87 Octane gas / Max 4.02 Quarts - An assistant If you have any questions, give us a call at 1-800-344-3371 or Support@qvtools.com.  

Tools needed: 13mm Socket Wrench 2 Strong Screwdrivers for Leverage   The Power King chippers do not have any tensioner or system to tension the belts as they are stretch fit belts.    1. Make engine switch is set to off to prevent accidental startup. 2. Remove 6 bolts on the belt cover with 13mm Socket Wrench. 3. Remove belt cover. 4. Position screw drivers depicted below and move left hand in upward motion to remove first belt. 5. Position screw driver depicted below to move 2nd belt onto 1st groove. 6. Once belt is on first groove, use the...